7
Waste collector
Clip the waste collector into the opening on the looper cover.
It catches the cut-o fabric as you sew, keeping your working
area neat and tidy.
Preparing the machine / Using the machine
Thread / cones / spools
The anti-vibration cone should be
used with the wider edge at the
bottom on the spool holder pin
when sewing with cones.
Large spools
If large industrial spools are
used, position the anti-vibration
cone upside down on the spool
holder pin, i .e. with the wider
edge at the top.
Household spools
Remove the anti-vibration cones.
Place spools on spool holder
pins and push the spool caps
on with the rounded side down-
wards.
Thread net
If the threads slip and get twist-
ed, cover the looper spools with
the net supplied in the accessory
bag.
To Next Page
Loading...
