JUKI SC-920 - Setting of the auto lifter function

– 37 –


(7) Setting procedure of the machine head
(Caution) For the operation panel other than CP-18, refer to the Instruction Manual for the operation
panel to be used for the setting procedure of the machine head.
1. Refer to "Ⅳ-(6) Setting for functions
of SC-920
Instruction Manual", and
call the function setting No. 95.
2. The type of machine head can be
selected by pressing
switch

(
switch

).
* Refer to "CAUTIONS WHEN SET-
TING UP THE SEWING MACHINE"
or "Machine head list" on the sepa-
rate sheet for the types of machine
heads.
3. After selecting the type of machine
head, by pressing
switch

(
switch

), the step proceeds to
96 or 94, and the display automati-
cally changes to the contents of the
setting corresponding with the type
of machine head.



