ENGLISH
108
A. Activating home mode
On the remote control: Press
to activate.
On the Smart Panel: Check first that the Smart Panel is in standby mode and then activate home
mode as instructed below.
Buttons Description Note
1 (1234/4-
digit PIN
code)
+
You must be in standby
mode before you can
activate home mode.
* How to check you are in standby mode:
Key in the factory-set PIN code 1 2 3 4 or your new 4-
digit PIN code.
Press .
The following appears on the Smart Panel when in
standby mode.
(One beep indicates that you have entered a valid PIN code.
Three beeps indicate that you have entered an incorrect code.)
2 4-digit
PIN code
+
Key in the 4-digit PIN
code, press and
for home mode.
The system now switches to home mode.
If the zone is activated, a number is displayed as
illustrated below:
B. Deactivating home mode
On the Smart Panel: Key in your 4-digit PIN code followed by
to deactivate home mode.
On the remote control: Press
to deactivate home mode.
To Next Page
Loading...