13
1 Introduction
LEFT and
RIGHT keys
You can use the (,) keys to select details on the screen when it is in the
normal display mode.
You can move to the next or previous function, while a function menu (Fn0 to
Fn9) is displayed.
You can move the cursor in front of and behind every character, when you are
altering a setting (editing names).
REC key During manual data logging (manual recording) you can use this key to store
the temperature and the date.
During automatic data logging (automatic recording) you can use this key as
an ON/OFF key for the data logging function.
To Next Page
Loading...
