33
5 Data logger
5.2 Automatic logging
The measured data are recorded in the memory at the preset interval. For
automatic data logging, you must first set the interval.
The following can be logged:
- the measured temperature,
- the date (without “year”),
- the TAG name and
- the user name.
5.2.1 Activating the interval
h In normal display, press the MENU/POWER key
three times to access the function menu
“Logging (Fn3)”.
h Press the SET key.
You will now see the interval setting screen.
Interval:
setting range: OFF (manual logging) or
1to3600 seconds (automatic logging)
factory-set: OFF
h Set the interval with the UP key
() and the shift
keys
(,).
Example: interval 15 seconds
h Press the SET key to save the new value.
The display returns to the data logging screen
(Fn3). When you have set the interval (to a value
other than “OFF”), the REC symbol ( ) blinks
to indicate “ready to measure”; automatic
measurement, however, is not yet active.
To retur n to normal display after setting, press the ESC key.
To Next Page
Loading...
