JUMO TDA-3000 - Starting Data Logging; Canceling Data Logging

5 Data logger
34
5.2.2 Starting data logging
h Press the REC key. Data logging starts at the preset interval. The REC
symbol light is on permanently.
Example Automatic data logging was started with TAG name No.2.
5.2.3 Canceling data logging
h Press the REC key. The REC symbol starts blinking and automatic data
logging is canceled.
H
How can I cancel the interval setting?
Press the ESC key during setting, not the SET key. The display
returns to the data logging screen (Fn3).
H
Automatic data logging can be started and stopped in normal
display and on the data logging screen (Fn3) by pressing the REC
key.
H
If the instrument is switched off during data logging by pressing
the MENU/POWER key or by automatic switch-off, data logging
continues with the preset interval. In the ON state, press the REC
key to cancel data logging.
Measurement is
within the limits
Normal display during
automatic data logging
REC light is on
during automatic
data logging