8 Configuration
48
8.3 Sensor type
Type Select the sensor type connected.
Select between: Pt100 (RTD),
TC-K (thermocouple K),
TC-J (thermocouple J) and
TC-T (thermocouple T)
factory-set: Pt100
h Press the UP ( ) or DOWN ( ) key to change between the individual
sensor types.
h Press the SET key to activated the selected sensor type.
h Press the ESC key twice to return to normal display.
8.4 Temperature unit
Unit Select the unit for the temperature display.
Select between: °C and °F
factory-set: °C
h Press the UP ( ) or DOWN ( ) key to change between the temperature
units.
h Press the SET key to activate the selected temperature unit.
h Press the ESC key twice to return to normal display.
To Next Page
Loading...
