JUMO TDA-3000 - Character Entry with Selection List

25
4 Temperature measurement
4.1.2 Character entry with selection list
Example Alter TAG name for No. 2 from “TAG02” to “PAN02”.
h Press the SET key in the menu “TAG Setup
(Fn2)” to show the TAG name on the screen.
h Press the UP key ( ).
The TAG name is shown on screen No. 2
h Press the SET key.
The cursor is positioned on the first character (“T”)
in the TAG name.
h Press the MENU/POWER key.
The character selection list appears.
h Press the UP key ( ).
The character selection list changes.
h Press the RIGHT key repeatedly ( ) to move
the cursor to “P”.
blinking