4 Temperature measurement
26
You have finished the setting.
Now you can set the upper and lower limits.
v Chapter 4.2 “Setting limits”
h Press the SET key to save the new character.
The screen returns to the TAG name screen for
TAG No. 2, the cursor moves to “A”.
h Press the RIGHT key ( ) to move the cursor to
“G”.
h Press the MENU/POWER key.
The character selection list appears.
h Press the DOWN key ( ).
The character selection list changes.
h Press the LEFT key repeatedly ( ) to move the
cursor to “N”.
h Press the SET key to save the new character.
The screen returns to the TAG name screen for
TAG No. 2, the cursor moves to “0”.
h Press the SET key to save the new
name.
To Next Page
Loading...
