9 Evaluating data with a PC
58
9.3 Disconnecting
Disconnect the TDA from the PC after the PC has been shut down and
switched off or observe the following instructions:
-Do not disconnect when the files are open or being stored at the moment.
This may result in a malfunction.
- Disconnecting a USB link is described in the documentation for the PC
operating system.
Example Windows XP
h Please make sure that all files are closed.
h Left-click the “Hardware removal” icon (disconnecting a USB link) in the
task bar of Windows.
h Select the instrument you want to remove by clicking on it with the left
mouse button.
h As soon as the message “Removal OK” appears, the instrument can be
removed from the USB interface.
To Next Page
Loading...
