47
8 Configuration
This chapter deals with the possibilities provided by the configuration menu
“Setup (Fn9)”. From normal display, start the configuration menu as follows:
h Press the MENU/POWER key until “Fn9” and “Setup” are displayed and
then press the SET key.
You are now in the configuration menu and are able to set the parameters.
-UP or DOWN key
( , ): alter selection.
-SET key: confirm selection and call the next parameter.
-ESC key: cancel selection and quit menu.
8.1 Language
Select the language in which you want to operate the instrument.
Select between: German, English and French
factory-set: German
h Press the UP ( ) or DOWN ( ) key to change between the
languages.
h Press the SET key to activate the selected language.
h Press the ESC key twice to return to normal display.
8.2 Date format
Select the format in which to display the date.
Select between: month/day and day/month
factory-set: day/month
h Press the UP ( ) or DOWN ( ) key to change between the individual
formats.
h Press the SET key to activate the selected format.
h Press the ESC key twice to return to normal display.
To Next Page
Loading...
