EasyManua.ls Logo

JUMO TDA-3000 - Fault Finding; 1 Error Messages

JUMO TDA-3000
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 Appendix
64
10.3 Fault finding
10.3.1 Error messages
H
Always switch the instrument off when replacing the sensor.
Display Description Solution
Battery is
nearly discharged.
Fit a new battery.
v Chapter 10.1
Battery is discharged. Fit a new battery
at once.
v Chapter 10.1
Sensor break Check sensor and
connection.
Overrange
The measured
temperature is 5%
above the upper range
limit or higher than the
maximum display range
(9999).
Check the input, input
range, sensor and sensor
connection.
Underrange
The measured
temperature is 5%
below the lower range
limit or lower than the
minimum display range
(-1999).
Check the input, input
range, sensor and sensor
connection.
[blinking]
[blinking]

Table of Contents

Related product manuals