JUMO TDA-3000 - 1.6 Function Menu Navigation

1 Introduction
14
1.6 Function menu
The TDA-300(0) has a function menu for running the functions that are required
for temperature measurement and recording (data logger). First select the
required function. Additional details about the individual menus can be found
on later pages in the operating instructions.
v See Chapter 5
“Data logger”
v See Chapter 4
“Temperature
measurement”
v See Chapter 5
“Data logger”
v See Chapter 6
“Peak/Bottom
value storage”
v See Chapter 2
“Preparation”
v See Chapter 8
“Configuration”
v See Chapter 7
“User names”