5 Data logger
36
h Press the MENU/POWER key to display the
TAG filter screen.
h Press the UP key
() to change the setting to
“ON”.
h Press the SET key to activate the TAG filter.
The TAG name is again displayed on the screen.
h If you press the UP or DOWN key
(, ) you
will now only see the data that have been
stored under the TAG name.
h Press the ESC key twice to return to normal
display.
How can I cancel the TAG filter time setting?
Change the TAG filter position by pressing the
DOWN key ( ) to “OFF” and then press the SET key.
To Next Page
Loading...
