4.6.2 Transporting a load
Requirements
– Load raised correctly.
– Good ground conditions.
Procedure
• Adapt your travel speed to the conditions of the route and the load you are
transporting.
• Move truck at a constant speed.
• Watch out for other traffic at crossings and passageways.
• Always move the truck with a lookout at blind spots.
WARNING!
Do not negotiate slopes or inclines.
4.6.3 Depositing a load
NOTICE
Loads must not be deposited on travel or escape routes, in front of safety
mechanisms or operating equipment that must be accessible at all times.
Requirements
– Storage location suitable for storing the load.
Procedure
• Drive the truck carefully up to the storage location.
• Push the handle (4) in direction S (lower) to lower the
load handler.
Z
Do not set the load down abruptly in order to avoid
damaging the load and the load handler.
• Carefully remove the load handler from the pallet.
The load has been set down.
59
11.19 en-GB
To Next Page
Loading...
Need help?
General
