Addition of individual weighings:
Procedure
• Load the system with the load to be added.
• Press the (37) key to add the weighed weight to the saved total weight.
The display shows the number of weighings recorded alternating with the total
weight. If the system is fitted with a built-in printer (o), the displayed value will be
printed out. After a few seconds the system reverts to standard weighing mode.
Z
If a tare weight is active, the net weights will be totalled.
To display the total weight:
Procedure
• Keep key (37) pressed for three seconds; the total weight calculated thus far will
be displayed.
The display shows the current number of weighings alternating with the total
weight. After a few seconds the system reverts to standard weighing mode.
Resetting the total of individual weighings:
Procedure
• Press the (37) key whilst the total weight is being displayed.
If the system is fitted with a built-in printer (o), a cumulative printout is performed
before the total is reset.
After resetting, the display shows the number of weighings recorded as 00 and
the starting value for the total weight as 0 kg (AMW 22) or 0.0 kg (AMW 22p).
After a few seconds the system reverts to standard weighing mode.
Printing (o)
64
11.19 en-GB
To Next Page
Loading...
Need help?
General
