Key functions
Z
Each key has three functions. In the weighing system description, the keys are
named according to their individual function.
Example
Function Displayed location Example
Additional function
(long key press)
Above the key
ID CODE
Standard function
(short key press)
On the key >0<
Input function
(in input mode)
Below the key Enter
Key functions
Key Function Description
Additional function Code entry
Standard function Zero setting
Input function Enter
Additional function Enter a known tare value
Standard function Automatic tare
Input function Reduce the value of a flashing digit
Additional function Display an intermediate result and print out the
total weight
Standard function Print out the weighing data and sum the
individual weights to form the total weight
Input function Increase the value of a flashing digit
Additional function No function
Standard function Start the special function (when active)
Input function Move left to the next digit
Additional function Switch between [kg] and [lb]
Activate and deactivateStandard function
Delete the entryInput function
Z
The functions are only executed if the load is stable and the arrow next to the
symbol is displayed – see page 76.
77
11.19 en-GB
To Next Page
Loading...
Need help?
General
