Jungheinrich EJC B14 User Manual

03.11 EN
72
Maintenance intervals
Standard = t WAB C
Cold store = k
Travel
4.1 Check transmission for noise and leakage. t
4.2 Replace the transmission oil if service life exceeded (10,000 hours). t
4.3 Check wheel suspension and attachment. kt
4.4 Check wheels for wear and damage. kt
Maintenance intervals
Standard = t WAB C
Cold store = k
Chassis and Superstructure
5.1 Check panels. t
5.2 Check labels are present and complete. t
5.3 Check the chassis and screw connections for damage. t
5.4 Check mast attachment / mounting. t
Maintenance intervals
Standard = t WAB C
Cold store = k
Hydraulic Operation
6.1
Test the "hydraulic function" controls and make sure the labels are
present and complete.
kt
6.2
Check cylinders and piston rods for damage and leaks, and make
sure they are secure.
kt
6.3
Check settings and wear levels of slide pieces and stops, and adjust
if necessary.
t
6.4
Visually inspect the mast rollers and check contact surface wear
level.
kt
6.5
Check that hose and pipe lines and their connections are secure,
check for leaks and damage.
kt
6.6 Check load chain setting and tension if necessary. t
6.7 Check lateral clearance of mast connections and of load handler. t
6.8 Test the hydraulic system. kt
6.9 Test the emergency lowering. t
6.10 Check hydraulic oil level and top up if necessary. kt
6.11 Replace the hydraulic oil after 2000 service hours / bi-annually. kt
6.12 Replace hydraulic oil filter t
03.11 EN
72
Maintenance intervals
Standard = t WAB C
Cold store = k
Travel
4.1 Check transmission for noise and leakage. t
4.2 Replace the transmission oil if service life exceeded (10,000 hours). t
4.3 Check wheel suspension and attachment. kt
4.4 Check wheels for wear and damage. kt
Maintenance intervals
Standard = t WAB C
Cold store = k
Chassis and Superstructure
5.1 Check panels. t
5.2 Check labels are present and complete. t
5.3 Check the chassis and screw connections for damage. t
5.4 Check mast attachment / mounting. t
Maintenance intervals
Standard = t WAB C
Cold store = k
Hydraulic Operation
6.1
Test the "hydraulic function" controls and make sure the labels are
present and complete.
kt
6.2
Check cylinders and piston rods for damage and leaks, and make
sure they are secure.
kt
6.3
Check settings and wear levels of slide pieces and stops, and adjust
if necessary.
t
6.4
Visually inspect the mast rollers and check contact surface wear
level.
kt
6.5
Check that hose and pipe lines and their connections are secure,
check for leaks and damage.
kt
6.6 Check load chain setting and tension if necessary. t
6.7 Check lateral clearance of mast connections and of load handler. t
6.8 Test the hydraulic system. kt
6.9 Test the emergency lowering. t
6.10 Check hydraulic oil level and top up if necessary. kt
6.11 Replace the hydraulic oil after 2000 service hours / bi-annually. kt
6.12 Replace hydraulic oil filter t

Jungheinrich EJC B14 Specifications

General

Brand	Jungheinrich
Model	EJC B14
Category	Trucks
Language	English