B 7
0708.GB
3.4 EN norms
Noise emission: 65 dB(A)
in accordance with EN 12053 as harmonised with
ISO 4871.
Z
The noise emission level is calculated in accordance with standard procedures and
takes into account the noise level when travelling, lifting and when idle. The noise
level is measured at the driver’s ear.
Vibration: 1,11 m/s
2
in accordance with EN 13059
Z
The vibration acceleration acting on the body in the operating position is, in
accordance with standard procedures, the linearly integrated, weighted acceleration
in the vertical direction. It is calculated during travel over bumps at constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms that equipment complies with
tolerance levels for electromagnetic emissions and
resistance as well as static electricity discharge testing in
accordance with EN 12895 including the normative
procedures contained therein.
Z
No changes to electrical or electronic components or their assembly may be made
without the written agreement of the manufacturer.
3.5 Conditions of use
Ambient temperature
- operating at 5°C to 40 °C
Z
Special equipment and a special approval are required if fork-lifttrucks are operated
under continued extreme temperature or humidity fluctuations.
The truck is not authorised for use in cold stores.
The truck may only be used in closed areas. The following applies:
– Average ambient temperature over 24 hours: max. 25 °C
– max. air humidity (inside) 70%, non-condensing.
B 7
0708.GB
3.4 EN norms
Noise emission: 65 dB(A)
in accordance with EN 12053 as harmonised with
ISO 4871.
Z
The noise emission level is calculated in accordance with standard procedures and
takes into account the noise level when travelling, lifting and when idle. The noise
level is measured at the driver’s ear.
Vibration: 1,11 m/s
2
in accordance with EN 13059
Z
The vibration acceleration acting on the body in the operating position is, in
accordance with standard procedures, the linearly integrated, weighted acceleration
in the vertical direction. It is calculated during travel over bumps at constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms that equipment complies with
tolerance levels for electromagnetic emissions and
resistance as well as static electricity discharge testing in
accordance with EN 12895 including the normative
procedures contained therein.
Z
No changes to electrical or electronic components or their assembly may be made
without the written agreement of the manufacturer.
3.5 Conditions of use
Ambient temperature
- operating at 5°C to 40 °C
Z
Special equipment and a special approval are required if fork-lifttrucks are operated
under continued extreme temperature or humidity fluctuations.
The truck is not authorised for use in cold stores.
The truck may only be used in closed areas. The following applies:
– Average ambient temperature over 24 hours: max. 25 °C
– max. air humidity (inside) 70%, non-condensing.
To Next Page
Loading...
Need help?
General
