Jungheinrich EKS 310k User Manual

0708.GB
F 8
4.1 Fuels, coolants and lubricants
Handling consumables: Consumables must always be handled correctly. Follow
the manufacturer’s instructions.
F
Improper handling is hazardous to health, life and the environment. Consumables
must only be stored in appropriate containers. They may be flammable and must
therefore not come into contact with hot components or naked flames.
Consumables must always be stored in clean containers only. The mixing of different
grade consumables is forbidden. The only exception to this is when mixing is
expressly stipulated in the operator manual.
Avoid spillage. Spilled liquids must be removed immediately with suitable bonding
agents and the bonding agent / consumable mixture must be dispoed of according to
regulations.
* Plus 2% additive 68 ID (order no. 50307735)
F
The trucks are supplied from the factory with “HLP D22” hydraulic oil or the
“Plantohyd 22 S” BIO hydraulic oil + 2 % 68 ID additive.
You cannot change from the Plantohyd 22 S BIO hydraulic oil to HLP D22. The same
applies to changing from HLP D22 hydraulic oil to Plantohyd 22 S BIOhydraulic oil.
Furthermore, you cannot mix HLP D22 hydraulic oilt Plantohyd 22 S BIO hydraulic oil.
Code Order No. Quantity
delivered
Filling
quantity
Designation Used for
A
51037497
51037494
5 l
1 l
ca. 33 l
HLP D22 + 2%
of 68 ID additive
Hydraulic system
51085361* 5 l
Plantohyd 22 S
(BIO hydraulic oil)
B 50022968 5 l 2.5 l SAE 80 EP API GL4 Transmission
D 29201580 5 l 0.18 l
Brake fluid
SAE DOT 4
Hydraulic brake system
E
14038650
400 g
cartridge
---
Lithium-saponified
grease KP2K-30
(DIN 51825)
General
29201430 1 kg
G 29201280 400 ml ---
Chain spray
Tunfluid LT 220
Lifting mast sliding
track, lifting chains
H 50157382 1 kg 400 g
Lithium-saponified
grease K3K-20
(DIN 51825)
Front wheel bearings
0708.GB
F 8
4.1 Fuels, coolants and lubricants
Handling consumables: Consumables must always be handled correctly. Follow
the manufacturer’s instructions.
F
Improper handling is hazardous to health, life and the environment. Consumables
must only be stored in appropriate containers. They may be flammable and must
therefore not come into contact with hot components or naked flames.
Consumables must always be stored in clean containers only. The mixing of different
grade consumables is forbidden. The only exception to this is when mixing is
expressly stipulated in the operator manual.
Avoid spillage. Spilled liquids must be removed immediately with suitable bonding
agents and the bonding agent / consumable mixture must be dispoed of according to
regulations.
* Plus 2% additive 68 ID (order no. 50307735)
F
The trucks are supplied from the factory with “HLP D22” hydraulic oil or the
“Plantohyd 22 S” BIO hydraulic oil + 2 % 68 ID additive.
You cannot change from the Plantohyd 22 S BIO hydraulic oil to HLP D22. The same
applies to changing from HLP D22 hydraulic oil to Plantohyd 22 S BIOhydraulic oil.
Furthermore, you cannot mix HLP D22 hydraulic oilt Plantohyd 22 S BIO hydraulic oil.
Code Order No. Quantity
delivered
Filling
quantity
Designation Used for
A
51037497
51037494
5 l
1 l
ca. 33 l
HLP D22 + 2%
of 68 ID additive
Hydraulic system
51085361* 5 l
Plantohyd 22 S
(BIO hydraulic oil)
B 50022968 5 l 2.5 l SAE 80 EP API GL4 Transmission
D 29201580 5 l 0.18 l
Brake fluid
SAE DOT 4
Hydraulic brake system
E
14038650
400 g
cartridge
---
Lithium-saponified
grease KP2K-30
(DIN 51825)
General
29201430 1 kg
G 29201280 400 ml ---
Chain spray
Tunfluid LT 220
Lifting mast sliding
track, lifting chains
H 50157382 1 kg 400 g
Lithium-saponified
grease K3K-20
(DIN 51825)
Front wheel bearings

Jungheinrich EKS 310k Specifications

General

Brand	Jungheinrich
Model	EKS 310k
Category	Forklifts
Language	English