Jungheinrich EME 112 - Moving an Incapacitated Truck (Emergency Operation)

0301.GB
C 2
3 Moving an incapacitated truck (emergency operation)
To move the truck by emergency operation, the electromagnetically applied brake
must be released.
– Losen screws (2).
– Remove front wall (3).
– Losen fastening screws (4) until the truck can be moved (no braking action).
The truck can now be moved.
m
After setting down the truck at the destination, the fastening screws (4) must be re-
tightened.
Braking action is restored!
2
3
4
2
0301.GB
C 2
3 Moving an incapacitated truck (emergency operation)
To move the truck by emergency operation, the electromagnetically applied brake
must be released.
– Losen screws (2).
– Remove front wall (3).
– Losen fastening screws (4) until the truck can be moved (no braking action).
The truck can now be moved.
m
After setting down the truck at the destination, the fastening screws (4) must be re-
tightened.
Braking action is restored!
2
3
4
2