EasyManua.ls Logo

Jungheinrich EME 112 - Discharge LED (Discharge Indicator)

Jungheinrich EME 112
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D 5
1001.GB
5 Discharge LED (discharge indicator)
The LED shows the charging condition of the battery.
m
In case of light applications (load < 300 kg), the battery must already be charged if
the green LED flashes.
When the LED is flashing red, the battery must be charged.
Further operation will damage the battery.
The battery will be drained, so that the voltage will fall below the minimum permissible
value.
A
When reaching the residual capacity of 20% (red LED flashes), lifting is interrupted.
State Colour Indication
on green Battery charge > 30%
flashing green Battery charge 30 - 20%
flashing red Battery charge < 20%
D 5
1001.GB
5 Discharge LED (discharge indicator)
The LED shows the charging condition of the battery.
m
In case of light applications (load < 300 kg), the battery must already be charged if
the green LED flashes.
When the LED is flashing red, the battery must be charged.
Further operation will damage the battery.
The battery will be drained, so that the voltage will fall below the minimum permissible
value.
A
When reaching the residual capacity of 20% (red LED flashes), lifting is interrupted.
State Colour Indication
on green Battery charge > 30%
flashing green Battery charge 30 - 20%
flashing red Battery charge < 20%

Table of Contents

Related product manuals