0301.GB
E 4
3 Starting up the truck
f
The driver must make sure that nobody is within the danger area of the truck before
the truck is switch on or operated or before a load is lifted.
Checks and operations to be performed before starting daily work
– Check the entire truck (especially the wheels and the load lifting device) for dama-
ge.
Switching on the truck
– Check whether the charging plug (7) is connected.
– Insert key element into key switch (8), press and turn clockwise to the limit and then
pull it up.
A
The discharge control LED (discharge indicator) (10) shows the present battery ca-
pacity.
– Check the “Horn” button (5) for proper functioning by pressing it.
The truck is now ready for operation.
– Check the braking function of the control shaft (see section 4.2).
7
10
8
5
0301.GB
E 4
3 Starting up the truck
f
The driver must make sure that nobody is within the danger area of the truck before
the truck is switch on or operated or before a load is lifted.
Checks and operations to be performed before starting daily work
– Check the entire truck (especially the wheels and the load lifting device) for dama-
ge.
Switching on the truck
– Check whether the charging plug (7) is connected.
– Insert key element into key switch (8), press and turn clockwise to the limit and then
pull it up.
A
The discharge control LED (discharge indicator) (10) shows the present battery ca-
pacity.
– Check the “Horn” button (5) for proper functioning by pressing it.
The truck is now ready for operation.
– Check the braking function of the control shaft (see section 4.2).
7
10
8
5