Jungheinrich HC 110 Operator's Manual

B 3
1004.GB
2.1 Truck
Structure: The HC is a four-wheel truck with two steer wheels (8) and two load
wheels (9). An smooth opening panel provides easy access to all the components.
The controls are arranged on the panel.
Safety mechanisms:
– The castor wheel assembly support (7) protects the operator’s feet.
Controls and Displays: The lift and lower controls are arranged on the panel.
The truck is fitted with a battery discharge indicator.
Steering: The tiller (11) is used for steering in a range of approx. 90° on either side.
Brake system: Below the tiller (11) a parking brake (9) is fitted, which is operated via
a brake pedal (10).
Hydraulic system: Lifting and lowering are activated via the lift and lower buttons.
The pump unit starts with lifting is activated. The hydraulic oil is pumped from the oil
reservoir into the cylinder. The load fork (3) raises.
Electrical System: 12 volt system.
B 3
1004.GB
2.1 Truck
Structure: The HC is a four-wheel truck with two steer wheels (8) and two load
wheels (9). An smooth opening panel provides easy access to all the components.
The controls are arranged on the panel.
Safety mechanisms:
– The castor wheel assembly support (7) protects the operator’s feet.
Controls and Displays: The lift and lower controls are arranged on the panel.
The truck is fitted with a battery discharge indicator.
Steering: The tiller (11) is used for steering in a range of approx. 90° on either side.
Brake system: Below the tiller (11) a parking brake (9) is fitted, which is operated via
a brake pedal (10).
Hydraulic system: Lifting and lowering are activated via the lift and lower buttons.
The pump unit starts with lifting is activated. The hydraulic oil is pumped from the oil
reservoir into the cylinder. The load fork (3) raises.
Electrical System: 12 volt system.

Jungheinrich HC 110 Specifications

General

Brand	Jungheinrich
Model	HC 110
Category	Forklifts
Language	English