Jungheinrich HC 110 - Battery Removal and Installation

1004.GB
D 4
4 Battery removal and installation
– Park the truck securely (see Chapter E).
– Undo the screws and remove the front panel.
M
Place the battery cable in such a way that it cannot get caught on the battery when
the battery is removed.
– Undo the terminal screws (4) and remove the battery cable from the terminals.
– Lift out the battery.
– Installation is the reverse order. When reinstalling the battery, note the proper
installation position and make sure the battery is connected correctly.
M
After installing the battery, check all cables and plug connections for visible signs of
damage.
F
Before starting the truck, the battery panel must be firmly closed. Close the battery
panel carefully and slowly. Do not reach between the battery panel and the chassis.
4
1004.GB
D 4
4 Battery removal and installation
– Park the truck securely (see Chapter E).
– Undo the screws and remove the front panel.
M
Place the battery cable in such a way that it cannot get caught on the battery when
the battery is removed.
– Undo the terminal screws (4) and remove the battery cable from the terminals.
– Lift out the battery.
– Installation is the reverse order. When reinstalling the battery, note the proper
installation position and make sure the battery is connected correctly.
M
After installing the battery, check all cables and plug connections for visible signs of
damage.
F
Before starting the truck, the battery panel must be firmly closed. Close the battery
panel carefully and slowly. Do not reach between the battery panel and the chassis.
4