Jungheinrich HC 110 - Correct Use and Application; General; Correct application; Approved application conditions

1004.GB
B 2
2 Assemblies
M
1)
The truck must not be operated without the Emergency Disconnect (see page C 2).
Item Description
1 t Mast
2 t Control panel
3 t Fork
4 t Load wheels
5 t Battery charging lead 230 volts AC (on-board battery charger)
6 t Front panel
7 t Castor wheel assembly support
8 t Steer wheels
9 t Parking brake
10 t Brake pedal (parking brake)
11 t Tiller
12 t Battery connector (Emergency Disconnect)
1)
13 t Push handles
t = Standard equipment o = Optional Equipment
1
2
3
4
5
6
7
8
9
10
11
12
13
1004.GB
B 2
2 Assemblies
M
1)
The truck must not be operated without the Emergency Disconnect (see page C 2).
Item Description
1 t Mast
2 t Control panel
3 t Fork
4 t Load wheels
5 t Battery charging lead 230 volts AC (on-board battery charger)
6 t Front panel
7 t Castor wheel assembly support
8 t Steer wheels
9 t Parking brake
10 t Brake pedal (parking brake)
11 t Tiller
12 t Battery connector (Emergency Disconnect)
1)
13 t Push handles
t = Standard equipment o = Optional Equipment
1
2
3
4
5
6
7
8
9
10
11
12
13