EasyManuals Logo
Home>Jungheinrich>Forklifts>HC 110

Jungheinrich HC 110 Operator's Manual

Jungheinrich HC 110
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
1004.GB
E 2
2 Controls and Displays
M
1)
The truck must not be operated without the Emergency Disconnect (see page C 2).
Item Control / Display Function
1 Battery discharge
indicator
t Battery charge status.
2 Charger LED status t Indicates the charge status (see Chapter D).
3 Key switch t Switches control current on and off.
Removing the key prevents the truck from
being switched on by unauthorised
personnel.
4 Load fork raise button t Raises the forks.
5 Load fork lower button t Lowers the forks.
6 Connection, on-board
battery charger
t Charges the battery by inserting the mains
connector into a mains socket.
7 Brake release (parking
brake), either side of
brake pedal
t Releases the brake
8 Brake pedal (parking
brake)
t Prevents the truck from rolling away.
9 Tiller t Moves and steers the truck.
10 Battery connector
(Emergency Disconnect)
t Disconnects the circuit, all electrical functions
are deactivated.
11 Push handles t Move the truck forward/backward.
t = Standard equipment o = Optional Equipment
1004.GB
E 2
2 Controls and Displays
M
1)
The truck must not be operated without the Emergency Disconnect (see page C 2).
Item Control / Display Function
1 Battery discharge
indicator
t Battery charge status.
2 Charger LED status t Indicates the charge status (see Chapter D).
3 Key switch t Switches control current on and off.
Removing the key prevents the truck from
being switched on by unauthorised
personnel.
4 Load fork raise button t Raises the forks.
5 Load fork lower button t Lowers the forks.
6 Connection, on-board
battery charger
t Charges the battery by inserting the mains
connector into a mains socket.
7 Brake release (parking
brake), either side of
brake pedal
t Releases the brake
8 Brake pedal (parking
brake)
t Prevents the truck from rolling away.
9 Tiller t Moves and steers the truck.
10 Battery connector
(Emergency Disconnect)
t Disconnects the circuit, all electrical functions
are deactivated.
11 Push handles t Move the truck forward/backward.
t = Standard equipment o = Optional Equipment

Table of Contents

Other manuals for Jungheinrich HC 110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich HC 110 and is the answer not in the manual?

Jungheinrich HC 110 Specifications

General IconGeneral
BrandJungheinrich
ModelHC 110
CategoryForklifts
LanguageEnglish

Related product manuals