Jungheinrich HC 110 Operator's Manual

1004.GB
B 6
3.3 EN norms
Electromagnetic compatibility (EMC)
The manufacturer confirms compliance with the limit
values for electromagnetic emission and interference
immunity as well as testing of static electricity discharge
according to EN 12895 and the references to other
standards contained therein.
Z
No changes to electric or electronic components or their arrangement may be made
without the written agreement of the manufacturer.
3.4 Conditions of use
Ambient temperature
- during operation -5 °C to 40 °C
Z
Special equipment and authorisation is required if the truck is to operate constantly
below -5 °C to -25 °C or in a cold store or in extreme temperatures or conditions of
fluctuating air humidity.
1004.GB
B 6
3.3 EN norms
Electromagnetic compatibility (EMC)
The manufacturer confirms compliance with the limit
values for electromagnetic emission and interference
immunity as well as testing of static electricity discharge
according to EN 12895 and the references to other
standards contained therein.
Z
No changes to electric or electronic components or their arrangement may be made
without the written agreement of the manufacturer.
3.4 Conditions of use
Ambient temperature
- during operation -5 °C to 40 °C
Z
Special equipment and authorisation is required if the truck is to operate constantly
below -5 °C to -25 °C or in a cold store or in extreme temperatures or conditions of
fluctuating air humidity.

Jungheinrich HC 110 Specifications

General

Brand	Jungheinrich
Model	HC 110
Category	Forklifts
Language	English