To Next Page

To Previous Page

0708.GB

F 2

Electrical System: Only suitably trained personnel may operate on the truck’s

electrical system. Before working on the electrical system, take all precautionary

measures to avoid electric shocks. For battery-operated trucks, also de-energise the

truck by removing the battery connector.

Welding: To avoid damaging electric or electronic components, remove these from

the truck before performing welding operations.

Settings: When repairing or replacing hydraulic, electric or electronic components or

assemblies, always note the truck-specific settings.

Tyres: The quality of tyres affects the stability and performance of the truck.

When replacing factory fitted tyres only used original manufacturer’s spare parts, as

otherwise the data plate specifications will not be kept.

When changing wheels and tyres, ensure that the truck does not slew (e.g. when

replacing wheels always left and right simultaneously).

Lift chains: Lift chains wear rapidly if not lubricated. The intervals stated in the

service checklist apply to normal duty use. More demanding conditions (dust,

temperature) require more regular lubrication. The prescribed chain spray must be

used in accordance with the instructions. Applying grease externally will not provide

sufficient lubrication.

Hydraulic hoses: The hoses must be replaced every six years. When replacing

hydraulic components, also replace the hoses in the hydraulic system.