Jungheinrich WMT 21 Series Service Manual

Page 19
v1.1
24.05.2023
LS-Support-Interfaces@jungheinrich.de
6.2 Ignition Key
The device has the option of being started or locked by means of an additional signal input. The function
serves to secure the system against unauthorised access and at the same time saves energy when
used in battery-operated vehicles or mobile locations.
Applying a voltage to the enable contact when the vehicle is switched off causes the device to switch
on automatically.
NOTE
If no ignition voltage is applied to the device, activating the ignition function may render the device
unusable until appropriate wiring has been established.

Jungheinrich WMT 21 Series Specifications

General

Brand	Jungheinrich
Model	WMT 21 Series
Category	Touch terminals
Language	English