9.2 Restore
There are 2 options available to reset the operating system to the factory settings or to a saved
backup state (see previous chapter):
Restore from Windows
In the "Backup and Restore" area in the configuration center, the image stored on the recovery partition
can be installed via the "Start Restore..." button:
Restore from boot menu (at least Image V4.1)
Connect a keyboard before switching on the device.
Power on the device, start the One-Time-Boot menu using the "ESC" key (alternatively front key "X")
and enter the admin password jhwmt.
In the menu "Please select boot device" that appears, select the option "Backup and Restore System"
with the arrow keys and confirm with Enter.
Then select the option "Restore System from Backup" by touching it.
To Next Page
Loading...
Need help?
General
