9.3 Installation with USB-Stick
Rquirments
• USB stick with 16 or 32 GB storage space.
• Either
o WMT 2XX with Jungheinrich Configuration Center at least v1.12.127
• Oder
o PC with Microsoft Windows 10 (oder höher)
• WinPE boot environment for WMT 2XX (please contact LS-Support-Interfaces@junghei-
rich.de)
Create the bootable USB-Stick from configuration center
In the "Backup and Restore" area in the Configuration Centre, a bootable USB stick can be created via
the "Create USB stick..." button.
Create the bootable USB-Stick with a PC
• - Format the USB stick with Windows standard tool with
FAT32 (see illustration on the right).
• - Copy the WinPE boot environment to the stick.
• - Copy the image to be installed (install*.swm) into the Im-
age directory on the USB stick.
Save the image on the bootable USB-Stick
The image to be installed must be stored on the boot stick in the di-
rectory "image" with the name "install*.swm".
The image is divided into several files because of the FAT32 file sys-
tem:
o install.swm
o install2.swm
o installx.swm
To Next Page
Loading...
Need help?
General
