Jungheinrich WMT 21 Series Service Manual

Page 28
v1.1
24.05.2023
LS-Support-Interfaces@jungheinrich.de
6.11 Serial Port Wedge
The Serial Port Wedge Tool interprets all incoming data as keyboard entries via the selected COM port.
Optionally, a pre- or postcode can be configured, which should be transmitted before or after the input.
Application example: Barcode scanner with serial port.
NOTE
Note that only one process can access a COM port at a time.
You can find a selection of possible pre- or postcodes in the following table:
Key
Code Syntax
BACKSPACE
{BACKSPACE}, {BS}, or {BKSP}
BREAK
{BREAK}
CAPS LOCK
{CAPSLOCK}
DEL or DELETE
{DELETE} or {DEL}
DOWN ARROW
{DOWN}
END
{END}
ENTER
{ENTER} or ~
ESC
{ESC}
HELP
{HELP}
HOME
{HOME}

Jungheinrich WMT 21 Series Specifications

General

Brand	Jungheinrich
Model	WMT 21 Series
Category	Touch terminals
Language	English