Application Layer Gateways (ALGs)
•
The show security alg msrpc object-id-map CLI command has a chassis cluster node
option to permit the output to be restricted to a particular node or to query the entire
cluster. The show security alg msrpc object-id-map node CLI command options are
<node-id | all | local | primary>.
AppSecure
•
On SRX1400, SRX3400,SRX3600, SRX5600, and SRX5800 devices, when you create
custom application or nested application signatures for Junos OS application
identification, the order value must be unique among all predefined and custom
application signatures. The order value determines the application-matching priority
of the application signature.
NOTE: The order value range for predefined signatures is 1 through 32,767.
We recommend that you use an order range higher than 32,767 for custom
signatures.
The order value is set with the set services application-identification application
application-name signature order command. You can also view all signature order
values by entering the show services application-identification | display set | match order
command. You will need to change the order number of the custom signature if it
conflicts with another application signature.
111Copyright © 2010, Juniper Networks, Inc.
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
To Next Page
Loading...