Class-of-Service Hierarchy
•
On SRX100, SRX210, SRX220, SRX240, SRX650, and J Series devices, the following
class-of-service hierarchy CLI commands are not supported. However, if you enter
these commands in the CLI editor, they appear to succeed and do not display an error
message.
set class-of-service classifiers ieee-802.1ad
set class-of-service interfaces interface-name unit 0 adaptive-shaper
Ethernet-Switching Hierarchy
•
On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
ethernet-switching hierarchy CLI commands are not supported. However, if you enter
these commands in the CLI editor, they appear to succeed and do not display an error
message.
set ethernet-switching-options bpdu-block disable-timeout
set ethernet-switching-options bpdu-block interface
set ethernet-switching-options mac-notification
set ethernet-switching-options voip interface access-ports
set ethernet-switching-options voip interface ge-0/0/0.0 forwarding-class
Firewall Hierarchy
•
On SRX100, SRX210, SRX220, SRX240 SRX650, and all J Series devices, the following
Firewall hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set firewall family vpls filter
set firewall family mpls dialer-filter d1 term
Interfaces CLI Hierarchy
On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
interface hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error message.
•
Aggregated Interface CLI on page 126
•
ATM Interface CLI on page 126
•
Ethernet Interfaces on page 127
•
GRE Interface CLI on page 127
•
IP Interface CLI on page 128
125Copyright © 2010, Juniper Networks, Inc.
Unsupported CLI
To Next Page
Loading...