EasyManua.ls Logo

Juniper JUNOS OS 10.4 - RELEASE NOTES - Errata

Juniper JUNOS OS 10.4 - RELEASE NOTES
197 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The new Junos OS Technical Documentation index page
(http://www.juniper.net/techpubs/software/junos/index.html ) consolidates
documentation for Junos OS features that are common to all platforms that run Junos
OS. The new index page provides direct access to core Junos OS information and links
to information for Junos OS features that run on particular platforms.
In Junos OS Release 10.3R1 and later, PDF files are not available for individual HTML
pages in the Junos OS documentation set. PDF files are available for the complete
Junos OS Release 10.3 configuration guides at
http://www.juniper.net/techpubs/software/junos/junos103/index.html. PDF files for the
complete hardware guides are accessible at the following URLs:
For M Series routers:
http://www.juniper.net/techpubs/en_US/release-independent/junos/informa
tion-products/pathway-pages/m-series/
For MX Series routers:
http://www.juniper.net/techpubs/en_US/release-independent/junos/informa
tion-products/pathway-pages/mx-series/
For T Series and TX Matrix routers:
http://www.juniper.net/techpubs/en_US/release-independent/junos/informa
tion-products/pathway-pages/t-series/
In addition, individual HTML pages have a Print link in the upper left corner of the text
area on the page.
Errata
This section lists outstanding issues with the documentation.
High Availability
TX Matrix Plus routers and T1600 routers that are configured as part of a routing matrix
do not currently support nonstop active routing. [High Availability]
Interfaces and Chassis
For the T320, T640, and T1600 routers, external clock synchronization is not supported
on sonic clock generators (SCG) with DB-9 external clock interfaces.
[System Basics, Hardware Guides]
The Configuring Layer 2 Circuit Transport Mode chapter in the Network Interfaces
Configuration Guide states the following:
For Layer 2 circuit cell relay and Layer 2 trunk modes, include the atm-l2circuit-mode
cell statement at the [edit chassis fpc slot pic slot] hierarchy level and the
encapsulation atm-ccc-cell-relay statement at the [edit interfaces interface-name]
hierarchy level.
This configuration is correct and interoperates with routers running all versions of Junos
OS.
However, the chapter does not mention that you can also include the encapsulation
atm-ccc-cell-relay statement at the [edit interfaces interface-name unit
67Copyright © 2010, Juniper Networks, Inc.
Errata and Changes in Documentation for Junos OS Release 10.4 for M Series, MX Series, and T Series Routers

Table of Contents

Related product manuals