•
Include the qualified-bum-pruning-mode statement in any retailer routing instances
you plan to use at the [edit routing-instances instance-name] hierarchy level.
•
Specify the permanent option for the connectivity-type statement at the [edit
routing-instances instance-nameprotocols vpls] hierarchy level to ensure that the
routing instance (pseudo-wire) remains operational.
•
Configure the VLAN Interfaces to use the dynamic profile. See the Subscriber Access
Configuration Guide for details.
•
Define access to your RADIUS server and specify the access profile at the [edit
access] hierarchy level.
To view the logical system and routing instance for each subscriber, use the show
subscriber operational command.
[Subscriber Access]
System Logging
•
New and deprecated system log tags—The following system log messages are new
in this release:
•
ASP_SFW_DELETE_FLOW
•
CHASSISD_FM_FABRIC_DOWN
•
CHASSISD_FPC_FABRIC_DOWN_REBOOT
•
CHASSISD_FRU_INTEROP_UNSUPPORTED
•
CHASSISD_RE_CONSOLE_FE_STORM
•
RPD_AMT_CFG_ADDR_FMLY_INVALID
•
RPD_AMT_CFG_ANYCAST_INVALID
•
RPD_AMT_CFG_ANYCAST_MCAST
•
RPD_AMT_CFG_LOC_ADDR_INVALID
•
RPD_AMT_CFG_LOC_ADDR_MCAST
•
RPD_AMT_CFG_PREFIX_LEN_SHORT
•
RPD_AMT_CFG_RELAY_INVALID
•
RPD_BGP_CFG_ADDR_INVALID
•
RPD_BGP_CFG_LOCAL_ASNUM_WARN
•
RPD_CFG_TRACE_FILE_MISSING
•
RPD_LDP_GR_CFG_IGNORED
•
RPD_MC_CFG_FWDCACHE_CONFLICT
33Copyright © 2010, Juniper Networks, Inc.
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
To Next Page