Juniper JUNOS OS 10.4 - RELEASE NOTES - J Series Compactflash and Memory Requirements

installed and configured, it automatically acts as a secondary boot device if the primary
CompactFlash card fails on startup. Depending on the size of the USB storage device,
you can also configure it to receive any core files generated during a router failure. The
USB device must have a storage capacity of at least 256 MB.
Table 11 on page 175 lists the USB and CompactFlash card devices supported for use with
the J Series Services Routers.
Table 11: Supported Storage Devices on the J Series Services Routers
Third-Party Part NumberStorage CapacityManufacturer
SDCZ2-256-A10256 MBSanDisk—Cruzer Mini 2.0
SDCZ3-512-A10512 MBSanDisk
SDCZ7-1024-A101024 MBSanDisk
DTI/512KR512 MBKingston
DTI/1GBKR1024 MBKingston
SDDR-91-A15N/ASanDisk—ImageMate USB 2.0
Reader/Writer for CompactFlash Type I
and II
SDCFB-512-455512 MBSanDisk CompactFlash
SDCFB-1000.A101 GBSanDisk CompactFlash
J Series CompactFlash and Memory Requirements
Table 12 on page 175 lists the CompactFlash card and DRAM requirements for J Series
Services Routers.
Table 12: J Series CompactFlash Card and DRAM Requirements
Maximum DRAM
Supported
Minimum DRAM
Required
Minimum CompactFlash
Card RequiredModel
1 GB512 MB512 MBJ2320
1 GB512 MB512 MBJ2350
2 GB512 MB512 MBJ4350
2 GB1 GB512 MBJ6350
Related
Documentation
New Features in Junos OS Release 10.4 for SRX Series Services Gateways and J Series
Services Routers on page 79
•
175Copyright © 2010, Juniper Networks, Inc.
Hardware Requirements for Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers