•
Port Troubleshooting page (Troubleshoot > Troubleshoot > Troubleshoot Port)
•
Static Routing page (Monitor > Routing > Route Information)
•
Support Information page (Maintain > Customer Support > Support Information)
•
View Events page (Monitor > Events and Alarms > View Events)
[PR/542887]
•
On EX4500 switches and on EX4200-24F switches, the total number of ports displayed
in the dashboard (Dashboard > Capacity Utilization > Total number of ports) in the
J-Web interface increases with the automatic refresh every two seconds. [PR/543913]
•
When you use an https connection, opening the Dashboard page (Log In > Dashboard)
in the J-Web interface takes a long time. [PR/549934]
•
If you insert Gigibit Ethernet transceivers in 40-port SFP+ line cards installed in EX8200
switches, the transceivers are incorrectly shown as copper transceivers in the image
of the switch in the Dashboard page in the J-Web interface. [PR/561695]
•
When no line card is installed in an EX8208 switch, if you:
•
Navigate to the Port Monitoring page (Monitor > Interfaces) in the J-Web interface,
a pop-up window with the error message “'gridData.0' is null or not an object” is
displayed.
•
Select the displayed interface and click on the Show Graph button, a pop-up window
with the error message “'selected FpcName' is undefined” is displayed.
[PR/562454]
•
If you navigate to a new page before all the components of a page in the J-Web interface
are loaded, a pop-up window with the error message “Object Expected” is displayed.
[PR/567756]
Spanning Tree Protocols
•
If you delete multiple interfaces from a configuration using a single commit command
and then add the interfaces back to the configuration, the packets might be dropped.
As a workaround, use a separate commit command to delete each interface.
[PR/570443]
Related
Documentation
New Features in Junos OS Release 10.4 for EX Series Switches on page 178•
• Changes in Default Behavior and Syntax in Junos OS Release 10.4 for EX Series Switches
on page 180
• Limitations in Junos OS Release 10.4 for EX Series Switches on page 181
• Resolved Issues in Junos OS Release 10.4 for EX Series Switches on page 189
• Errata in Documentation for Junos OS Release 10.4 for EX Series Switches on page 191
• Upgrade and Downgrade Instructions for Junos OS Release 10.4 for EX Series Switches
on page 191
Copyright © 2010, Juniper Networks, Inc.188
JUNOS OS 10.4 Release Notes
To Next Page
Loading...