might not recognize the LACP messages sent by the EX4200 switch and the links
therefore become standalone links. [PR/505069: This issue has been resolved.]
•
On a 40-port SFP+ line card in an EX8200 switch, if you assign different shaping rates
to different ports in a port group, you do not receive an error message when you commit
the configuration, and no error is logged in the system log. As a workaround, configure
the same shaping rate on all ports in a port group. [PR/524073: This issue has been
resolved.]
•
In a Q-in-Q tunneling configuration that includes aggregated Ethernet interfaces (LAGs),
after a pfem process restart, the member interfaces in the VLAN might be incorrectly
set. [PR/527117: This issue has been resolved.]
J-Web Interface
•
In the J-Web interface, the automatic command-completion feature might not be
disabled in the password field. As a workaround, you can disable the automatic
command-completion feature in the browser. [PR/508425: This issue has been
resolved.]
•
In the J-Web interface, when you select the Ethernet Switching Monitor page (Monitor
> Switching > Ethernet Switching), the MAC learning log might not display information.
[PR/535200: This issue has been resolved.]
•
In the LACP (Link Aggregation Control Protocol) Configuration page in the J-Web
interface (Configure > Interfaces > Link Aggregation), the Delete button is disabled
even when you select an aggregated Ethernet interface configured with a physical
interface, VLAN, and IP option. As a workaround, delete the physical interface, VLAN,
and IP option from the aggregated Ethernet interface using the CLI. [PR/546411]
•
In the J-Web interface, when you use an https connection in the Microsoft Internet
Explorer browser, you cannot upload (Maintain > Config Management > Upload) or
download (Maintain > Config Management > History > Configuration History) a
configuration file. As a workaround, use an http connection. [PR/5512000: This issue
has been resolved.]
Layer 2 and Layer 3 Protocols
•
If there are many joins associated with a neighbor and that neighbor goes down and
comes back up quickly, then those joins might be stranded in an unresolved state until
the clear pim join command is issued. [PR/539962: This issue has been resolved.]
Management and RMON
•
On EX4200 switches, the LACP process (lacpd) creates core files when SNMP MIB
lookup is performed. [PR/533226: This issue has been resolved.]
Related
Documentation
New Features in Junos OS Release 10.4 for EX Series Switches on page 178•
• Changes in Default Behavior and Syntax in Junos OS Release 10.4 for EX Series Switches
on page 180
• Limitations in Junos OS Release 10.4 for EX Series Switches on page 181
Copyright © 2010, Juniper Networks, Inc.190
JUNOS OS 10.4 Release Notes
To Next Page
Loading...