Juniper JUNOS OS 10.4 - RELEASE NOTES - Page 68

logical-unit-number] hierarchy level. when you include the statement at the [edit
interfaces interface-name unit logical-unit-number]] hierarchy level, keep the following
points in mind:
•
This configuration interoperates only between Juniper Networks routers running
Junos OS Release 8.2 or earlier.
•
This configuration does not interoperate with other network equipment, including a
Juniper Networks router running Junos OS Release 8.3 or later, unless it is also
configured with the same use-null-cw statement.
•
For a Juniper Networks router running Junos OS Release 8.3 or later to interoperate
with another Juniper Networks router running Junos OS Release 8.2 or earlier, on the
router running Junos OS Release 8.3 or later, include the use-null-cw statement at
the [edit interfaces interface-name atm-options] hierarchy level.
•
The use-null-cw statement inserts (for sending traffic) or strips (for receiving traffic)
an extra null control word in the MPLS packet.
•
The use-null-cw statement is not supported on a router running Junos OS Release
8.2 or earlier.
[Network Interfaces]
•
With Junos OS Release 10.1 and later, you need not include the tunnel option or the
clear-dont-fragment-bit statement when configuring allow-fragmentation on a tunnel.
[Services Interfaces]
J-Web Interface
•
To access the J-Web interface, your management device requires the following
software:
•
Supported browsers—Microsoft Internet Explorer version 7.0 or Mozilla Firefox version
3.0
•
Language support—English-version browsers
•
Supported OS—Microsoft Windows XP Service Pack 3
MX Series 3D Universal Edge Routers
•
The MX Series 3D Universal Edge Routers are sometimes referred to as MX Series
Ethernet Services Routers. Both names refer to the same MX Series routers. This will
be standardized to MX Series 3D Universal Edge Routers in the documentation in later
releases.
•
For a complete list of available features on MX80 routers please contact your sales
engineer or the Juniper Technical Assistance Center.
Copyright © 2010, Juniper Networks, Inc.68
JUNOS OS 10.4 Release Notes