EasyManua.ls Logo

Juniper JUNOS OS 10.4 - RELEASE NOTES - Page 96

Juniper JUNOS OS 10.4 - RELEASE NOTES
197 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Event-specific drill-down to determine traffic characteristics and policy rule matches
Composite reports of recent threats or traffic
[Junos OS Administration Guide for Security Devices]
Optional CP Session Capacity Expansion on Fully Configured DevicesThis feature
is supported on SRX3400, SRX3600, and SRX5800 devices.
The session capacity for the central point (CP) for fully configured SRX3400, SRX3600,
and SRX5800 devices can be expanded as shown in the following list.
Maximum Concurrent CP Sessions on a Fully Loaded System
SRX Series Devices With Expanded CapacityDefault
3 million2.25 millionSRX3400
6 million2.25 millionSRX3600
14.0 million12.5 millionSRX5800
On an SRX3400 or SRX3600 device, you expand the maximum CP session capacity
by installing the SRX3K-EXTREME-LTU license.
On an SRX5800 device, you expand the maximum CP session capacity by specifying
the maximize-cp-sessions optimization option in the edit security forwarding-process
application-services command. Using this optimization technique precludes other
optimization methods, disables advanced GTP processing, and reduces routing capacity
to 100K prefixes.
[Junos OS Security Configuration Guide]
SNMP
SNMP enterprise-specific MIBsThis feature is supported on all SRX Series and J
Series devices.
Junos OS Release 10.4 adds support for enterprise-specific MIBs for the SRX1400
device.
[SRX1400, SRX3400, and SRX3600 Services Gateways MIB Reference]
SRX Series Image Upgrade Using a USB Device
This feature is supported on SRX100, SRX210, SRX220, SRX240, and SRX650 devices.
The SRX Series Image Upgrade using a USB device feature simplifies the upgrading of
Junos OS images in cases where there is no console access to an SRX Series device
located at a remote site. This feature allows you to upgrade the Junos OS image with
minimum configuration effort by simply inserting a USB flash drive into the USB port
of the SRX Series device and performing a few simple steps.
NOTE: USB upgrades are not supported on chassis clusters.
Copyright © 2010, Juniper Networks, Inc.96
JUNOS OS 10.4 Release Notes

Table of Contents

Related product manuals