Juniper QFX5200 - Page 165

Table 44: Chassis Alarm Messages for QFX5200-32C-L (Connued)
Component Alarm Type CLI Message Recommended Acon
Minor (yellow)
FPC 0 Temperature Warm
Check environmental condions
and alarms on other devices. Ensure
that environmental factors (such as
hot air blowing around the
equipment) do not aect the
temperature sensor.
FPC 0 Temp Sensor Fail
Check the system log for the
following error message and report
the message to customer support:
Management
Ethernet
interface
Major (red)
Management interface management-
interface-name down on node
Check whether a cable is connected
to the management Ethernet
interface, or whether the cable is
defecve. Replace the cable, if
required.
RELATED DOCUMENTATION
Denions of Safety Warning Levels | 170
Conguring Junos OS to Determine Condions That Trigger Alarms on Dierent Interface Types
alarm
156