Juniper QFX5200 - Page 35

Table 13: Interpreng Chassis Status LEDs on a QFX5200-32C and QFX5200-32C-L (Connued)
Name Color State Descripon
Red On steadily A major hardware fault has occurred,
such as a temperature alarm or
power failure, and the switch has
halted. Power o the QFX5200-32C
or QFX5200-32C-L by seng the
AC power source outlet to the OFF
(O) posion, or unplugging the AC
power cords. Correct any voltage or
site temperature issues, and allow
the switch to cool down. Power on
the QFX5200-32C and
QFX5200-32C-L.Monitor the power
supply and fan LEDs to help
determine where the error is
occurring.
Amber On steadily A minor alarm has occurred, such as
a soware error. Power o the
QFX5200 or QFX5200-32C-L by
seng the AC power source outlet
to the OFF (O) posion, or
unplugging the AC power cords.
Power on the QFX5200-32C or
QFX5200-32C-L and monitor the
status LEDs to ensure that Junos OS
boots properly.
SYS–System Unlit O The switch is powered o or halted.
Green On steadily Junos OS for QFX Series is loaded
on the switch.
MST–Primary RE in a
QFX5200-32C Virtual
Chassis
Unlit O The switch is standalone.
Green On steadily The switch is operang as the
primary RE in a QFX5200-32C
Virtual Chassis.
26