Juniper QFX5200 User Manual

Table 23: DC Power Supply LEDs on a QFX5200-32C (Connued)
Name Color State Descripon
Green On steadily The power supply is sending out power
correctly.
Fault Amber On steadily An error has been detected in the power
supply. Replace the power supply as soon
as possible. To maintain proper airow
through the chassis, leave the power
supply installed in the chassis unl you are
ready to replace it.
Table 24: DC Power Supply LED on a QFX5200-48Y
Color State Descripon
Unlit O The power supply is disconnected from power, or power is not coming into
the power supply.
Green Blinking The PSU is in standby mode. Power is coming into the power supply at +5V.
On steadily The power supply is sending out power correctly.
Alternang red/
green
Blinking Power supply warning. Check the logs for related messages.
Red On steadily An error has been detected in the power supply. Replace the power supply as
soon as possible. To maintain proper airow through the chassis, leave the
power supply installed in the chassis unl you are ready to replace it.
Blinking The internal fan in the power supply has failed. Replace the power supply as
soon as possible. To maintain proper airow through the chassis, leave the
power supply installed in the chassis unl you are ready to replace it.
54

Juniper QFX5200 Specifications

General

Brand	Juniper
Model	QFX5200
Category	Switch
Language	English