Table 37: Required Setup Fields (continued)
Your ActionFieldSetup Wizard Page
Specify the tab that you want to appear
when J-Web starts.
J-Web starting page optionsConfigure J-Web
Preferences
Specify when you want J-Web to commit
your configuration changes.
J-Web commit options
Review your configuration settings. Click
Back to return to previous wizard pages
and change the settings. Click Commit
when you are satisfied with the
configuration.
Review & Commit
Table 38: Optional Setup Fields
Your ActionFieldSetup Wizard Page
Type the IP address of the default
gateway
Default GatewayConfigure System:
Network Settings
Type the IP address of each server that
maintains databases for resolving
hostnames and IP addresses, and click
Add.
DNS Name Servers
Type the IP address or domain name of
each domain that includes the services
gateway to include it in a DNS search.
Domain Search
Use buttons to add, edit, or delete
VLANs
Interface Groups
(VLANs)
Use buttons to add, edit, or delete
interfaces other than VLANs.
Configure Interfaces
Click the Reset Manually button to reset
the time.
Current System TimeConfigure System:
Time
Choose the time zone from the listTime Zone
Add Network Time Protocol (NTP)
servers that the gateway can reach to
synchronize the system time.
NTP Servers
After you configure the basic setup, the Setup wizard is no longer available, unless you
reset the device to the factory default and reboot it. To make changes to the configuration,
use the J-Web interface or the CLI.
Copyright © 2012, Juniper Networks, Inc.118
SRX220 Services Gateway Hardware
To Next Page
Loading...
Need help?
General
