You can use other wizards to configure basic firewall policies, VPN settings, and NAT
rules. Choose Configure > Wizards to use the available wizards. Use the J-Web interface
or the CLI for more extensive configuration.
For more instructions on managing users and operations, monitoring network performance,
upgrading software, and diagnosing common problems on an SRX220 Services Gateway,
see the Junos OS Administration Guide for Security Devices.
Related
Documentation
• Connecting to the SRX220 Services Gateway Setup Wizard on page 101
• SRX220 Services Gateway Software Configuration Overview on page 109
• Performing Initial Software Configuration on the SRX220 Services Gateway Using the
CLI on page 113
• SRX220 Services Gateway Secure Web Access Overview on page 121
119Copyright © 2012, Juniper Networks, Inc.
Chapter 16: Configuring Basic Settings
To Next Page
