EasyManua.ls Logo

Juniper SSG 20 - Port and Power Connectors

Juniper SSG 20
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SSG 20 Hardware Installation and Configuration Guide
2 Port and Power Connectors
Port and Power Connectors
Table 1 shows the ports and power connectors on an SSG 20 device.
Table 1: SSG 20 Port and Power Connectors
AUX
0/0
10 /100
AUX
0/0
10/100
0/0
10/100
0/0
10 /100
0/0
10/ 100
LINK
STATUS
POWER
PIM 2
PIM 1
b/g
802.11a
WLAN
SSG 20
12
PIM 2PIM 1
Antenna AAntenna B
AUX Console e0/0 e0/1 e0/2 e0/3 e0/4
Port Description Connector Speed/Protocol
Ports 0/0-0/4 Enables direct connections to workstations or a LAN
connection through a switch or hub. This
connection also allows you to manage the device
through a Telnet session or the WebUI.
RJ-45 10/100 Mbps Ethernet
Autosensing duplex and auto MDI/MDIX
USB Enables a 1.1 USB connection with the system. N/A 12M (full speed) or 1.5M (low speed)
Console Enables a serial connection with the system. Used
for terminal-emulation connectivity to launch
Command Line Interface (CLI) sessions.
RJ-45 9600 bps/ RS-232C serial
AUX Enables a backup serial Internet connection through
an external modem.
RJ-45 9600 bps — 115 Kbps/ RS-232C serial
Mini PIM
ADSL 2/2+ Enables an Internet connection through an ADSL
data link.
RJ-11
(Annex A)
RJ-45
(Annex B)
ANSI T1.413 Issue 2 (Annex A only)
ITU G.992.1 (G.dmt)
ITU G.992.2 (G.lite) (Annex A only)
ITU G.992.3 (ADSL2)
ITU G.992.5 (ADSL2+)
V.92 Modem Enables a primary or backup Internet or untrusted
network connection to an Internet Service Provider
(ISP).
RJ-11 9600 bps — 115 Kbps/ RS-232 Serial
autosensing duplex and polarity
T1 Enables a connection to the T1 line to the untrusted
network.
RJ-45
E1 Enables a connection to the E1 line to the untrusted
network.
RJ-45
ISDN Enables the ISDN line to be used as the untrust or
backup interface.
RJ-45 B-channels at 64 Kbps
Antenna A & B
(SSG 20-WLAN)
Enables a direct connection to workstations in the
vicinity of a wireless radio connection.
RPSMA 802.11a (54 Mbps on 5GHz radio band)
802.11b (11 Mbps on 2.4GHz radio band)
802.11g (54 Mbps on 2.4GHz radio band)
802.11 superG (108 Mbps on 2.4GHz
radio band)

Table of Contents

Related product manuals