SSG 20 Hardware Installation and Configuration Guide
viii WebUI Conventions
WebUI Conventions
A chevron ( > ) shows the navigational sequence through the WebUI, which you
follow by clicking menu options and links. The following figure shows the following
path to the address configuration dialog box—Objects > Addresses > List > New:
Figure 1: WebUI Navigation
To perform a task with the WebUI, you first navigate to the appropriate dialog box,
where you then define objects and set parameters. The set of instructions for each
task is divided into navigational path and configuration settings:
The next figure lists the path to the address configuration dialog box with the
following sample configuration settings:
Objects > Addresses > List > New: Enter the following, then click OK:
Address Name: addr_1
IP Address/Domain Name:
IP/Netmask: (select), 10.2.2.5/32
Zone: Untrust
Figure 2: Navigational Path and Configuration Settings
CLI Conventions
The following conventions are used to present the syntax of CLI commands in
examples and in text.
To Next Page
Loading...
