Juniper SSG 20 - Untrust Zone (Ethernet0;0 Interface) Window

 XV
10. Untrust Zone (Ethernet0/0 Interface) Window
The Untrust zone interface can have a static IP address or a dynamic IP address
assigned via DHCP or PPPoE. Insert the necessary information, then click Next.
Figure 15: ethernet0/0 Interface Window
Table 13: Field Descriptions for Ethernet0/0 Interface
Field Description
Dynamic IP via DHCP Enables the device to receive an IP address for the Untrust zone
interface from an ISP.
Dynamic IP via PPPoE Enables the device to act as a PPPoE client, receiving an IP address
for the Untrust zone interface from an ISP. Enter the username and
password assigned by the ISP.
Static IP Assigns a unique and fixed IP address to the Untrust zone interface.
Enter the Untrust zone interface IP, Netmask, and gateway.